Items where Subject is "Engineering"

Group by: Creators | Item Type
Jump to: A | B | C | D | F | G | H | I | J | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items at this level: 52.

A

Abubakar, I. and Yusuf, D. D. and Muhammed, U. S. and Zakariyah, A. and Agunsoye, J. K. and Habiba, K. A. and Bashar, Z. U. (2019) Performance Evaluation of a Portable Ginger Slicing Machine. Journal of Engineering Research and Reports, 5 (3). pp. 1-8. ISSN 2582-2926

Adler, Eytan J. and Brelje, Benjamin J. and Martins, Joaquim R. R. A. (2022) Thermal Management System Optimization for a Parallel Hybrid Aircraft Considering Mission Fuel Burn. Aerospace, 9 (5). p. 243. ISSN 2226-4310

Ahmed, Sameh E. and Mahdy, A. (2012) Natural Convection Flow and Heat Transfer Enhancement of a Nanofluid past a Truncated Cone with Magnetic Field Effect. World Journal of Mechanics, 02 (05). pp. 272-279. ISSN 2160-049X

Amoo, M. O. and Ademiju, T. A. and Adesigbin, A. J. and Ali, G. A. (2019) Performance Evaluation of Drip Irrigation Systems on Production of Okra (Hibiscus esculentus) in Southwestern, Nigeria. Journal of Engineering Research and Reports, 5 (3). pp. 1-10. ISSN 2582-2926

B

Babalola, T. E. and Babalola, A. D. and Olokun, M. S. (2022) Development of an ESP-32 Microcontroller Based Weather Reporting Device. Journal of Engineering Research and Reports, 22 (11). pp. 27-38. ISSN 2582-2926

Bashahu, Mathias and Nsabimana, Pierre and Barakamfitiye, Juvenal and Niyukuri, Fidele (2022) Assessment of the Wind Energy Potential of Two Burundian Sites. Energy and Power Engineering, 14 (05). pp. 181-200. ISSN 1949-243X

C

Carvajal-Mariscal, I. and De León-Ruiz, J. E. and Belman-Flores, J. M. and Martínez-Espinosa, E. and José-Pineda, O. (2023) Experimental assessment and semi empirical estimation of frost accretion—A case study on a spine-finned inverted-V tube array evaporator. Frontiers in Mechanical Engineering, 9. ISSN 2297-3079

Couto, Nuno and Rouboa, Abel and Monteiro, Eliseu and Viera, José (2012) Computational Fluid Dynamics Analysis of Greenhouses with Artificial Heat Tube. World Journal of Mechanics, 02 (04). pp. 181-187. ISSN 2160-049X

D

Dominguez, Victor H. and Garcia-Salazar, Octavio and Amezquita-Brooks, Luis and Reyes-Osorio, Luis A. and Santana-Delgado, Carlos and Rojo-Rodriguez, Erik G. (2022) Micro Coaxial Drone: Flight Dynamics, Simulation and Ground Testing. Aerospace, 9 (5). p. 245. ISSN 2226-4310

F

Feaugas, Thomas and Newman, Gwenyth and Calzuola, Silvia Tea and Domingues, Alison and Arditi, William and Porrini, Constance and Roy, Emmanuel and Perrault, Cecile M. (2023) Design of artificial vascular devices: Hemodynamic evaluation of shear-induced thrombogenicity. Frontiers in Mechanical Engineering, 9. ISSN 2297-3079

Felipe Rodriguez, Juan and Xu, Hui and Hampson, Greg and Windom, Bret and Marchese, Anthony and B. Olsen, Daniel (2022) Heavy Duty Natural Gas Single Cylinder Research Engine Installation, Commissioning, and Baseline Testing. Energy and Power Engineering, 14 (06). pp. 217-232. ISSN 1949-243X

Ferrarotti, Marco and Amaduzzi, Ruggero and Bascherini, Davide and Galletti, Chiara and Parente, Alessandro (2020) Heat Release Rate Markers for the Adelaide Jet in Hot Coflow Flame. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

G

Galindo-Linares, Elizabeth and Navarro-Morale, Esperanza and Silva-Ortigoza, Gilberto and Suárez-Xique, Román and Marciano-Melchor, Magdalena and Silva-Ortigoza, Ramón and Román-Hernández, Edwin (2012) Any Hamiltonian System Is Locally Equivalent to a Free Particle. World Journal of Mechanics, 02 (05). pp. 246-252. ISSN 2160-049X

Ghosh, S. K. and Shit, G. C. (2012) Mixed Convection MHD Flow of Viscoelastic Fluid in a Porous Medium past a Hot Vertical Plate. World Journal of Mechanics, 02 (05). pp. 262-271. ISSN 2160-049X

H

Haddabi, Naser Al and Kontis, Konstantinos and Zare-Behtash, Hossein (2021) The Impact of Steady Blowing from the Leading Edge of an Open Cavity Flow. Aerospace, 8 (9). p. 255. ISSN 2226-4310

Hilal, Anwer Mustafa and Althobaiti, Maha M. and Eisa, Taiseer Abdalla Elfadil and Alabdan, Rana and Hamza, Manar Ahmed and Motwakel, Abdelwahed and Al Duhayyim, Mesfer and Negm, Noha and R, Lakshmipathy (2022) An Intelligent Carbon-Based Prediction of Wastewater Treatment Plants Using Machine Learning Algorithms. Adsorption Science & Technology, 2022. pp. 1-9. ISSN 0263-6174

Hsiao, Fu-Yuen (2022) Variation of Osculating Orbit Elements Using Low-Thrust Photonic Laser Propulsion in the Two-Body Problem. Aerospace, 9 (2). p. 75. ISSN 2226-4310

Huang, Zheng and Zhang, Wei and Chen, Ti and Wen, Hao and Jin, Dongping (2022) Characterizing an Air-Bearing Testbed for Simulating Spacecraft Dynamics and Control. Aerospace, 9 (5). p. 246. ISSN 2226-4310

I

Iglesias, Luis and Shanmugam, Priyadarshini and Michaud, Jean-François and Alquier, Daniel and Certon, Dominique and Dufour, Isabelle (2020) Proof of Concept and Preliminary Results of Gas Detection by Measuring the Admittance at the Resonance and Anti-resonance of an Uncoated CMUT. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

J

Jin, Congying (2024) Study on Mechanical Properties of Fiber-reinforced Cement-based Materials. Journal of Engineering Research and Reports, 26 (11). pp. 156-162. ISSN 2582-2926

K

Kamps, Landon and Hirai, Shota and Nagata, Harunori (2021) Hybrid Rockets as Post-Boost Stages and Kick Motors. Aerospace, 8 (9). p. 253. ISSN 2226-4310

Khurshid, Hifsa and Mustafa, Muhammad Raza Ul and Isa, Mohamed Hasnain and Mignardi, Silvano (2022) A Comprehensive Insight on Adsorption of Polyaromatic Hydrocarbons, Chemical Oxygen Demand, Pharmaceuticals, and Chemical Dyes in Wastewaters Using Biowaste Carbonaceous Adsorbents. Adsorption Science & Technology, 2022. pp. 1-30. ISSN 0263-6174

Kim, Young-kuk and Kang, Donghwa and Kim, Hyung-rae and Kim, Sung-bin and Yoo, Bongyoung (2020) The Characteristics of Selective 3D Metal Additive Process Using Electrochemical Deposition and Nozzle Fluid Dynamics. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Kotb, Ashraf and Askar, Hamada and Saad, Hany (2023) On the impingement of heat transfer using swirled air jets. Frontiers in Mechanical Engineering, 9. ISSN 2297-3079

Krishnanunni, Aleena V and Kaur, Naveet and Bhalla, Suresh (2024) Singly Curved Thin Piezo Transducers for Energy Harvesting and Structural Health Monitoring, Edition 1. BP International. ISBN 978-93-48006-50-9

L

Liu, Zhiqiang and Hu, Qiuyue (2022) Application of Artificial Neural Networks for Chemical Industry Safety Production: A Review. Journal of Engineering Research and Reports, 22 (11). pp. 18-26. ISSN 2582-2926

Liu, Zhongyuan and Zhang, Binqian (2022) Investigation on a Flow Coupling Rudder for Directional Control of a Low-Aspect Tailless Configuration with Diamond-Shaped Wing. Aerospace, 9 (2). p. 79. ISSN 2226-4310

M

Makanjuola, Philip Olawatimileyin and Shokenu, Emmanuel Segun and Araromi, Haonat Olajumoke and Idowu, Peter Olalekan and Babatunde, Joshua Dada (2022) An Rfid-Based Access Control System Using Electromagnetic Door Lock and an Intruder Alert System. Journal of Engineering Research and Reports, 22 (11). pp. 7-17. ISSN 2582-2926

Mathews, Julius B. and Rachner, Jonas and Kaven, Lea and Grunert, Dennis and Göppert, Amon and Schmitt, Robert H. (2023) Industrial applications of a modular software architecture for line-less assembly systems based on interoperable digital twins. Frontiers in Mechanical Engineering, 9. ISSN 2297-3079

Mendoza, Mariane and Buera, Maria Virginia and Pablo, Joel and Dinglasan, Jerome (2022) Understanding the Cause and Effect of Bent Side Rail in Molding Process. Journal of Engineering Research and Reports, 22 (11). pp. 1-6. ISSN 2582-2926

Mostafa, Nagwan G. and Yunnus, Ahmad F. and Elawwad, Abdelsalam and Kyzas, George (2022) Adsorption of Pb(II) from Water onto ZnO, TiO2, and Al2O3: Process Study, Adsorption Behaviour, and Thermodynamics. Adsorption Science & Technology, 2022. pp. 1-13. ISSN 0263-6174

Mouhoumed, Elmi Idil and Abdillahi Mohamed, Mohamed-Awal and Ibrahim Igueh, Abdourachid (2022) Study of Different Parameters Affecting the Productivity of Solar Still for Seawater Desalination under Djiboutian Climate. Energy and Power Engineering, 14 (06). pp. 201-216. ISSN 1949-243X

N

Nepal, Ganga Datta (2019) Climate Change Effect on Water Supply Sanitation and Hygiene (WASH) Sector. Journal of Engineering Research and Reports, 5 (3). pp. 1-5. ISSN 2582-2926

Nishimura, Akira and Mishima, Daiki and Kono, Nozomu and Toyoda, Kyohei and Kolhe, Mohan Lal (2022) Impact of Separator Thickness on Temperature Distribution in Single Polymer Electrolyte Fuel Cell Based on 1D Heat Transfer. Energy and Power Engineering, 14 (07). pp. 248-273. ISSN 1949-243X

O

Obot, Okure U. and Obike, Peter and James, Imaobong (2024) Automated Marking System for Essay Questions. Journal of Engineering Research and Reports, 26 (5). pp. 107-126. ISSN 2582-2926

Ojo, O. O. and Akinnuli, B. O. and Farayibi, P. K. (2019) Data Mining and Statistical Analysis for Available Budget Allocation Pre-procurement of Manufacturing Equipment. Journal of Engineering Research and Reports, 5 (3). pp. 1-13. ISSN 2582-2926

Olabisi, Odutola Toyin (2022) The Application of Blended Learning in Teaching Petroleum Production Engineering Course in the University of Port Harcourt. Journal of Engineering Research and Reports, 22 (11). pp. 39-47. ISSN 2582-2926

P

Posani, Massimo and Pontani, Mauro and Gasbarri, Paolo (2022) Nonlinear Slewing Control of a Large Flexible Spacecraft Using Reaction Wheels. Aerospace, 9 (5). p. 244. ISSN 2226-4310

Prajapati, Anuj Kumar and Verma, Pushkar and Singh, Satyansh and Mondal, Monoj Kumar and Kooh, Muhammad Raziq Rahimi (2022) Adsorption-Desorption Surface Bindings, Kinetics, and Mass Transfer Behavior of Thermally and Chemically Treated Great Millet Husk towards Cr(VI) Removal from Synthetic Wastewater. Adsorption Science & Technology, 2022. pp. 1-16. ISSN 0263-6174

R

Radwan, Nasser A. A. and Bahloul, Khaled M. M. (2019) Numerical Study of Strip Footings Behavior on Compacted Sand. Journal of Engineering Research and Reports, 5 (3). pp. 1-10. ISSN 2582-2926

Reitmann, Stefan and Schultz, Michael (2022) An Adaptive Framework for Optimization and Prediction of Air Traffic Management (Sub-)Systems with Machine Learning. Aerospace, 9 (2). p. 77. ISSN 2226-4310

Rosenow, Judith and Chen, Gong and Fricke, Hartmut and Wang, Yanjun (2022) Factors Impacting Chinese and European Vertical Fight Efficiency. Aerospace, 9 (2). p. 76. ISSN 2226-4310

S

Sun, Haojun and Hu, Jiamin (2023) Analysis and Research of Compound Refrigeration based on Logic Control Battery. Journal of Engineering Research and Reports, 24 (11). pp. 35-55. ISSN 2582-2926

T

Tkachev, Stepan and Mashtakov, Yaroslav and Ivanov, Danil and Roldugin, Dmitry and Ovchinnikov, Mikhail (2021) Effect of Reaction Wheel Imbalances on Attitude and Stabilization Accuracy. Aerospace, 8 (9). p. 252. ISSN 2226-4310

Todorov, Vladislav T. and Rakov, Dmitry and Bardenhagen, Andreas (2022) Enhancement Opportunities for Conceptual Design in Aerospace Based on the Advanced Morphological Approach. Aerospace, 9 (2). p. 78. ISSN 2226-4310

Toure, Cheikh Saliou and Sow, Papa Lat Tabara and Dia, Fakora and Mbodji, Senghane (2022) Experimental Analysis to Extract the Maximum Output of Serial and Parallel PV Module Configurations under Partial Shadow Conditions: A Case Study for Bambey, Senegal. Energy and Power Engineering, 14 (07). pp. 233-247. ISSN 1949-243X

Tran, Hoang V. and Hoang, Nhan T. and Le, Thu D. and Tran, Luyen T. and Dang, Hue T. M. and Pham, Thi Ngoc Mai (2022) Graphene Oxide/Fe3O4/Chitosan−Coated Nonwoven Polyester Fabric Extracted from Disposable Face Mask for Enhanced Efficiency of Organic Dye Adsorption. Adsorption Science & Technology, 2022. pp. 1-13. ISSN 0263-6174

W

Walsh, Sarah and Murphy, David and Doyle, Maeve and Reilly, Jack and Thompson, Joseph and Dunwoody, Rachel and Erkal, Jessica and Finneran, Gabriel and Fontanesi, Gianluca and Mangan, Joseph and Marshall, Fergal and Salmon, Lána and de Faoite, Daithí and Hanlon, Lorraine and Martin-Carrillo, Antonio and McKeown, David and O’Connor, William and Uliyanov, Alexey and Wall, Ronan and McBreen, Sheila (2021) Development of the EIRSAT-1 CubeSat through Functional Verification of the Engineering Qualification Model. Aerospace, 8 (9). p. 254. ISSN 2226-4310

Y

Yahya, S. M. and Anwer, S. F. and Sanghi, S. (2012) A Conservative Pressure-Correction Method on Collocated Grid for Low Mach Number Flows. World Journal of Mechanics, 02 (05). pp. 253-261. ISSN 2160-049X

Yin, Wanxiang and Guo, Pengyan and Wei, Jiabao and Peng, Jiale and Bian, Ningkang and Xing, Hao (2024) Development Status of Flow Field Design for Bipolar Plates in Hydrogen Fuel Cells. Journal of Engineering Research and Reports, 26 (10). pp. 250-261. ISSN 2582-2926

Yuan, Hao and Li, Dongxu and Wang, Jie (2022) Hybrid Guidance Optimization for Multipulse Glideslope Approach with Bearing-Only Navigation. Aerospace, 9 (5). p. 242. ISSN 2226-4310

Z

Zong, Jianan and Zhu, Bingjie and Hou, Zhongxi and Yang, Xixiang and Zhai, Jiaqi (2021) Evaluation and Comparison of Hybrid Wing VTOL UAV with Four Different Electric Propulsion Systems. Aerospace, 8 (9). p. 256. ISSN 2226-4310

This list was generated on Thu Nov 21 09:40:09 2024 UTC.